Products Archive By `Z2 engaged tips`
-
Shank cutter multitasking interchangeable profiled PCD insert – copy bearing – MFX1
FPS3001
Insert PCD shank cutter multitasking with interchangeable profiled knife and copy bearing. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter multitasking interchangeable profiled PCD inserts – center cutting – MFX2
FPS3002
Insert PCD shank cutter multitasking with interchangeable profiled knife and center cutting knife. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
To be used also on finishing passage on nesting operation after sizing. So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter for “V” grooving and for chamfering at 45° – VGroove 90°
FPS3011
Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.
-
PCD straight shank cutter nesting alternate cut pos / neg Z2 HDM body with rough / finisching cutting tips – POWERCUT 2
FPD2038
Re-sharpening shank cutter in diamond with full tips, cutting angle (1 positive – 1 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.
-
PCD helicoidal shank cutter Z2+2 steel body PCD H2,5 mm – EC4E
FPD2015
PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HM steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 steel body PCD Hh4,5 mm – RC4
FPD2016
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HM steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.