Drilling bits
Showing all 40 results
-
HW dowel drilling bit – FOUR LINE LT57,5 mm
PFO7501
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT70 mm
HW DOWEL DRILLING BIT
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT90 mm
PFO7503
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT105 mm
PFO7504
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT55,5 mm
PFO7505
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT67 mm
PFO7506
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – TWO LINE LT57,5 MM
PFO7507
Super-strength steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit TWO LINE LT70 MM
PFO7508
Super-strength steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – TWO LINE LT77 MM
PFO7509
Super-strength steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit R-LINE LT57,5 MM
PFO7510
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs
(V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷
4m/minute –RPM 6000. -
HW dowel drilling bit – R-LINE LT70 MM
PFO7511
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs
(V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷
4m/minute –RPM 6000. -
HW dowel drilling bit with round spurs – POWER LINE LT57,5 MM
PFO7512
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷ 4m/minute –RPM 6000.
-
HW dowel drilling bit with round spurs – POWER LINE LT70 MM
PFO7513
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷ 4m/minute –RPM 6000.
-
HWM micrograin drilling bit – EXTREME LT70 MM
PFO7514
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷ 4m/minute –RPM 6000.
-
HW hinges drilling bit – PLCH LT57,5 MM
PFO7515
Super-strength steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and length adjusting screw.
-
HW hinges drilling bit – PLCH LT70 MM
PFO7516
Super-strength steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and length adjusting screw.
-
HW hinges drilling bit – PLCH LT90 MM
PFO7517
Super-strength steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT57,5 MM
PFO7518
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT70 MM
PFO7519
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT115 MM
PFO7520
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT58 MM
PFO7521
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT70 MM
PFO7522
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT77 MM
PFO7523
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit with special sharpening – TLINE 2L LT58 MM
PFO7524
Premium quality super-strength steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw length.
-
HW through holes drilling bit with special sharpening – TLINE 2L LT70 MM
PFO7525
Premium quality super-strength steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw length.
-
HW through holes drilling bit with special sharpening – TLINE 2LH PFO 7526 LT58 MM
PFO7526
Premium quality super-strength steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw length.
-
HW through holes drilling bit with special sharpening – TLINE 2LH LT70 MM
PFO7527
Premium quality super-strength steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw length.
-
Solid carbide dowel drill with countersink – SVP SVASATORE PIANE LT57,5 MM
PFO7532
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide dowel drill with countersink – SVP SVASATORE PIANE LT70 MM
PFO7533
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide through holes dowel drill with countersink – SLV LT70 MM
PFO7534
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length
adjusting screw.