Products Archive By `Steel body`
-
PCD helicoidal shank cutter Z2+2 cutting angle 45° steel body PCD H4,5 mm – RX4SC
FPD2034
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 54,9° steel body PCD H4,5 mm – REX2
FPD2036
PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.
-
PCD helicoidal shank cutter Z3+3 cutting angle 30° steel body PCD H4,5 mm – RX6
FPD2030
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter for nesting Z3+3 steel body PCD H3,5 mm mainly negative – POWERCUT 4NA
FPD2058
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutters Z2+2 double rotation – R4B
FPD2048
PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.
-
PCD helicoidal shank cutters Z3+3 double rotation – ULB
FPD2049
PCD helicoidal shank cutter Z3+3 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, three helicoidal wing, plunge tip in PCD steel body cutting angle 20°. Suitable for working on laminated chipboard panels and laminated MDF.
-
HW dowel drilling bit – FOUR LINE LT57,5 mm
PFO7501
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT70 mm
HW DOWEL DRILLING BIT
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT90 mm
PFO7503
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.