Products Archive By `Mechanic feeding system`
-
PCD helicoidal shank cutter Z2+2 steel body PCD H2,5 mm – ECX3
FPD2020
PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HM,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
-
PCD helicoidal shank cutter Z2+2 steel body PCD H4,5 mm – RX3
FPD2021
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
-
PCD helicoidal shank cutter Z3+3 steel body PCD H4,5 mm – UL
FPD2024
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z3+3 steel body PCD H4,5 mm – ULC
FPD2025
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.
-
PCD helicoidal shank cutter Z2+2cutting angle 30° steel body PCD H4,5 mm – RX4
FPD2028
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2cutting angle 30° steel body PCD H4,5 mm – RX4
FPD2057
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 30° steel body PCD H4,5 mm – RX4C
FPD2029
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 45° steel body PCD H4,5 mm – RX4S
FPD2033
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 45° steel body PCD H4,5 mm – RX4SC
FPD2034
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 54,9° steel body PCD H4,5 mm – REX2
FPD2036
PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.
-
PCD helicoidal shank cutter Z3+3 cutting angle 30° steel body PCD H4,5 mm – RX6
FPD2030
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter for nesting Z3+3 steel body PCD H3,5 mm mainly negative – POWERCUT 4NA
FPD2058
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.