Products Archive By `Manual feeding system`
-
HW through holes drilling bit – FLINE L LT57,5 MM
PFO7518
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT70 MM
PFO7519
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT115 MM
PFO7520
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT58 MM
PFO7521
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT70 MM
PFO7522
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT77 MM
PFO7523
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide dowel drill with countersink – SVP SVASATORE PIANE LT57,5 MM
PFO7532
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide dowel drill with countersink – SVP SVASATORE PIANE LT70 MM
PFO7533
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide through holes dowel drill with countersink – SLV LT70 MM
PFO7534
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length
adjusting screw.