MICROTECH
Showing all 184 results
-
Shank cutter multitasking interchangeable profiled PCD insert – copy bearing – MFX1
FPS3001
Insert PCD shank cutter multitasking with interchangeable profiled knife and copy bearing. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter multitasking interchangeable profiled PCD inserts – center cutting – MFX2
FPS3002
Insert PCD shank cutter multitasking with interchangeable profiled knife and center cutting knife. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
To be used also on finishing passage on nesting operation after sizing. So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter interchangeable PCD profiled inserts for “V“ profiles at 90° / 91° – MFX3
FPS3003
Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter interchangeable PCD profiled inserts for “V“ profiles at 90° / 91° – MFX4
FPS3004
Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1+1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter interchangeable PCD inserts for planing slave panels and CNC tables – MFX5
FPS3005
Insert PCD shank cutter with interchangeable profiled knife for planning slave panels during nesting and for calibrating CNC machine tables. Suitable for working on different materials such as MDF, HDF, HPL, Trespa, Carbon fiber panels (CFRP).
So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter interchangeable PCD inserts for planing slave panels and CNC tables -MFX6
FPS3006
Insert PCD shank cutter with interchangeable profiled knife for planning slave panels during nesting and for calibrating CNC machine tables. Suitable for working on different materials such as MDF, HDF, HPL, Trespa, Carbon fiber panels (CFRP).
It is possible to work inside the panel using Z axes without interpolation. So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter interchangeable PCD inserts Z1 for “V“ engravings and profile – MFX7
FPS3007
Insert PCD shank cutter with interchangeable profiled knife Z=1. Suitable for profiling or engravings operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
So many are the advantages of this tool: Constructive geometries that eliminate any mismatch between the cutter body and the PCD insert ensuring high positioning of inserts and repeatability. Another advantage is that the PCD insert is worked in a cold conditions without undergoing any kind of stress due to welding operation. So the PCD inserts keep all the features, increasing the tool life and cutting quality.
-
Shank cutter for “V” grooving and for chamfering at 45° – VGroove 90°
FPS3011
Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.
-
PCD straight shank cutter nesting alternate cut pos / neg Z2 HDM body with rough / finisching cutting tips – POWERCUT 2
FPD2038
Re-sharpening shank cutter in diamond with full tips, cutting angle (1 positive – 1 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.
-
PCD straight shank cutter for nesting with alternate Z4 HDM body with rough / finisching cutting tips – POWERCUT 3
FPD2039
Re-sharpening shank cutter with full tips, cutting angle (2 posive – 2 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.
-
PCD helicoidal straight shank cutter Z1+1 PCD H2,5 mm – EC2E
FPD2011
PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HM steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal straight shank cutter Z1+1 PCD H2,5 mm – EC2EH HDM
FPD2053
PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip inHDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter for wood Z1+1 steel body PCD H4,5 mm – RC3
FPD2013
PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HM steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 steel body PCD H2,5 mm – EC4E
FPD2015
PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HM steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 steel body PCD Hh4,5 mm – RC4
FPD2016
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HM steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.
-
PCD helicoidal shank cutter Z1+1 / 2+2 steel body PCD H2,5 mm- EC4S
FPD2017
PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HM, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.
-
PCD helicoidal shank cutter Z1+1 with copy bearing steel body PCD H2,5 mm – EC3EB
FPD2014
PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 steel body PCD H2,5 mm – ECX3
FPD2020
PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HM,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
-
PCD helicoidal shank cutter Z2+2 steel body PCD H4,5 mm – RX3
FPD2021
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
-
PCD helicoidal shank cutter Z3+3 steel body PCD H4,5 mm – UL
FPD2024
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z3+3 steel body PCD H4,5 mm – ULC
FPD2025
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.
-
PCD helicoidal shank cutter Z2+2cutting angle 30° steel body PCD H4,5 mm – RX4
FPD2028
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2cutting angle 30° steel body PCD H4,5 mm – RX4
FPD2057
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 30° steel body PCD H4,5 mm – RX4C
FPD2029
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 45° steel body PCD H4,5 mm – RX4S
FPD2033
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 45° steel body PCD H4,5 mm – RX4SC
FPD2034
PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 54,9° steel body PCD H4,5 mm – REX2
FPD2036
PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.
-
PCD helicoidal shank cutter Z3+3 cutting angle 30° steel body PCD H4,5 mm – RX6
FPD2030
PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
-
PCD helicoidal shank cutter Z2+2 cutting angle 25° PCD H4,5 mm – POWERCUT 5
FPD2040
PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20°, HDM (High density metal).
-
PCD helicoidal shank cutter for nesting Z2+2 HDM body – POWERCUT 8N
FPD2059
Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 steel body PCD H3,5 mm mainly negative – POWERCUT 4NA
FPD2058
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 PCD H3,5 mm mainly positive – POWERCUT 4P
FPD2042
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly positive helix, HDM (High density metal) body, PCD H3,5 mm. Tool suitable for nesting, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 hdm body PCD H3,5 mm, mainly negative – POWERCUT 4N
FPD2041
Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutter for nesting Z3+3 HDM body, PCD H3,5 mm, mainly negative – POWERCUT 6N
FPD2043
Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
-
PCD helicoidal shank cutters Z2+2 double rotation – R4B
FPD2048
PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.
-
PCD helicoidal shank cutters Z3+3 double rotation – ULB
FPD2049
PCD helicoidal shank cutter Z3+3 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, three helicoidal wing, plunge tip in PCD steel body cutting angle 20°. Suitable for working on laminated chipboard panels and laminated MDF.
-
PCD helicoidal shank cutters Z2+2 for machining door locks, HDM body
FPD2052
PCD helicoidal shank cutter Z2+2 for machining door locks with body anti-vibration in HDM (High density metal). The two negative tips give a good finishing during the opetation for the slot the others two positive tips with chip breaker help the evaquation of wooden chips from the slot.
-
HW dowel drilling bit – FOUR LINE LT57,5 mm
PFO7501
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT70 mm
HW DOWEL DRILLING BIT
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT90 mm
PFO7503
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT105 mm
PFO7504
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT55,5 mm
PFO7505
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – FOUR LINE LT67 mm
PFO7506
Super-strength steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – TWO LINE LT57,5 MM
PFO7507
Super-strength steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit TWO LINE LT70 MM
PFO7508
Super-strength steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit – TWO LINE LT77 MM
PFO7509
Super-strength steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW dowel drilling bit R-LINE LT57,5 MM
PFO7510
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs
(V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷
4m/minute –RPM 6000. -
HW dowel drilling bit – R-LINE LT70 MM
PFO7511
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs
(V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷
4m/minute –RPM 6000. -
HW dowel drilling bit with round spurs – POWER LINE LT57,5 MM
PFO7512
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷ 4m/minute –RPM 6000.
-
HW dowel drilling bit with round spurs – POWER LINE LT70 MM
PFO7513
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷ 4m/minute –RPM 6000.
-
HWM micrograin drilling bit – EXTREME LT70 MM
PFO7514
Premium quality super strength steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw length. Recommended feed speed 1÷ 4m/minute –RPM 6000.
-
HW hinges drilling bit – PLCH LT57,5 MM
PFO7515
Super-strength steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and length adjusting screw.
-
HW hinges drilling bit – PLCH LT70 MM
PFO7516
Super-strength steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and length adjusting screw.
-
HW hinges drilling bit – PLCH LT90 MM
PFO7517
Super-strength steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT57,5 MM
PFO7518
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT70 MM
PFO7519
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – FLINE L LT115 MM
PFO7520
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT58 MM
PFO7521
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT70 MM
PFO7522
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit – TLINE L LT77 MM
PFO7523
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
HW through holes drilling bit with special sharpening – TLINE 2L LT58 MM
PFO7524
Premium quality super-strength steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw length.
-
HW through holes drilling bit with special sharpening – TLINE 2L LT70 MM
PFO7525
Premium quality super-strength steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw length.
-
HW through holes drilling bit with special sharpening – TLINE 2LH PFO 7526 LT58 MM
PFO7526
Premium quality super-strength steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw length.
-
HW through holes drilling bit with special sharpening – TLINE 2LH LT70 MM
PFO7527
Premium quality super-strength steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw length.
-
Solid carbide dowel drill with countersink – SVP SVASATORE PIANE LT57,5 MM
PFO7532
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide dowel drill with countersink – SVP SVASATORE PIANE LT70 MM
PFO7533
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and length adjusting screw.
-
Solid carbide through holes dowel drill with countersink – SLV LT70 MM
PFO7534
Super-strength steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and length
adjusting screw. -
Turbofan ring with chipboard extraction fan
AEM8020
Ring nut with chip extraction turbine applicable to HSK ER32, HSK ER40 and EOC25 (DIN6388) tool holders. The turbine replaces the standard ring nut. Maximum extraction of the chip on the worked surface. Recommended for nesting operations Chip extraction allows an increase in tool life and finish. The alloy body of the turbine does not generate vibrations to the machine. Possibility of use from 6000 rpm up to 20000 rpm. Suitable to work on chipboard, MDF, corian, OSB, multilayer, plastic materials. Attention: use the turbine as close to the panel as possible, guaranteeing greater chip removal pressure (from 1 to 2 mm from the worktop).